Fitch Fuel Catalyst
Oil Burner Treatment

The Fitch Fuel Catalyst is UL Certified and available for all commercial and residential oil burners. Residential applications are warranted for 10 years and commercial applications for 10,000 operating hours.

Immediate results from installing Fitch on a Residential Oil Burner (after running until the treated fuel gets to the burner):

1. Stack temperature increases

2: Catalyst increases the heat output per gallon burned

3: Reduce nozzle size as a result of less fuel required to obtain the same BTU output.

This improved combustion also means cleaner burning of the fuel. The heating appliance will stay cleaner, maintain a higher degree of operating efficiency and require less maintenance.

 
The Fitch Fuel Catalyst for oil burner applications is designed to improve both the economy and the overall performance of your heating system. The catalyst reacts with the fuel resulting in significant improvements in combustion.

Reduce Fuel Consumption (reduction in nozzle size)

Reduce Emissions

Improve Combustion Efficiency

Improve Overall Performance

Provide a Cleaner Burn

The Fitch® Fuel Catalyst is a maintenance free device which easily installs in the fuel line much like a fuel filter. The correct size unit is determined by the by maximum capacity of the boiler.

  After leaving the refinery, all fuels begin to degrade in quality. They are affected by oxygen, ozone and various microorganisms including yeast, mold and bacteria. The longer any fuel is stored before using, the more it degrades. When the fuel goes through the Fitch Fuel Catalyst it is re-refined and its original quality restored thus enabling it to burn more completely. The improved combustion resulting from the catalyst increases the heat output per gallon burned. This enables the burner fuel nozzle size to be reduced. Consequently less fuel is required to obtain the same BTU output. The improved combustion also means cleaner burning of the fuel. The burner will stay cleaner for a longer time. This means the burner system will maintain a higher degree of operating efficiency over a longer time period.

Installation of the Fitch Fuel Catalyst must be performed by a qualified technician. The special instruments and equipment used by the technician are required to ensure the proper installation and operation of the unit. The technician will assure that the proper nozzle size has been selected for the burner and that inlet air, stack temperatures, and soot levels are measured and adjusted correctly.

The fitch Fuel Catalyst is a is installed in the fuel delivery line and is a maintenance-free device with a guaranteed life of ten (10) years.

H0-5UL Oil Home Heating applications. (Max 5 gph flow rate) LENGTH DIMENSIONS END TO END: 3.75 DIAMETER: 3" Download installation information here. Download burner presentation here.

H0-10UL Oil Heating applications. (Max 10 gph flow rate) LENGTH DIMENSIONS END TO END: 4.1/16th" DIAMETER: 3" Download installation information here. Download burner presentation here.